6.8 Configuration of User Accounts
Click [User] and enter user configuration interface (Figure 6-43), and add, delete or
modify user account and privileges.
Figure 6-43 User Configuration Interface
There is a default administrator account for the system: admin, with its password:
12345. Only this user has complete privilege and is able to add, delete or modify other user
accounts, while all the other users can only modify their own passwords.
[Add]
Click [Add] and add operator account after login the system with admin account
(Figure 6-44). Input user name, password, confirm password and add the operator.
Admin can also disable/enable the operator account, or restrict its login IP or MAC for
remote client software connection.
Figure 6-44 Add Users
To Next Page
Loading...
