Figure 6-16 Add Group
Users can modify the auto-generated group name and duration interval, and also can
select between different screen split modes by clicking the appropriate icons. Click on a
camera in camera list and drag it into the desired display screen position, and click [OK] to
save the configuration. Users can click on the upper-right of each screen to delete the
added camera.
6.4.2 Modify Group
Select a group and click [Modify] or double click on the group, and then the Group
Modification dialog box will prompt and users can modify the group settings accordingly. The
operation steps are same as when adding a group.
6.4.3 Remove Groups
Select the group(s) on the group list, click [Delete] and then click [OK] on the prompt
message box (Figure 6-17) to delete settings of the selected group(s).
Figure 6-17 Delete Group Message Box
To Next Page
Loading...
