4.5 Section Playback
Section Playback: In accordance with set start and end time, average the single-channel
record to 4/9/16 sections by the record time. Then playback one channel record data by the
segment at the same time.
Click [Section] in the [Button Area] to enter the section playback interface.
(Figure 4-25)
Figure 4-25 Section Playback Interface
Steps:
1. Select channel in the [Camera] combo box (the channel being synchronizing);
2. Set the start time and the end time, and select the number of sections (4/9/16).
3. Click [Play] button to start section playback. The section information is displayed in
the left [Section Info]. Split screen automatically adjust according to the number of
sections.
4. The function of the control bar button is the same as in synchronous playback.
To Next Page
Loading...
