3.2.1 Live Preview of a Single Camera
You can live preview specified camera by selecting and double-clicking the left mouse
button on the camera that you want to view live. The camera image will be displayed in
selected window. You can also do that by dragging the selected camera to a window.
3.2.2 Live Preview of Multiple Cameras
If you want to live preview several cameras in current division mode (IP cameras or
analog cameras), you could drag the root node into live preview area to achieve that. For
example, if the play area is divided into 4 parts, 4 cameras will be displayed in four windows.
If the play area is divided into 9 parts, all 8 analog cameras will be displayed.
3.3 Live Preview in Group Mode
Please make sure that you have added camera group before playing in group(See 6.4.1
Add Group for more). As shown in Figure 3-2, two groups have been added.
3.3.1 Live Preview of a Specified Group
Double click on a group name in the camera list to preview the corresponding cameras of
the group in the live preview area. Preview area configuration will be that which was
configured when grouping cameras. Groups can also be previewed by dragging them to the
play windows.
3.3.2 Cycle Live Preview of a Group
You can cycle live preview of current groups. Double click the group node and all the
cameras of the group begin to cycle in the live preview area and the windows are divided into
the division configured when grouping cameras. Each group stays visible for configured time
and then display switches to the next group.
To Next Page
Loading...
