will prompt as shown in Figure 3-29.
Figure 3-29 Right-click Menu
3.6.3 Pattern
Users could record the path of PTZ in patterns. Recorded patterns can be later recalled.
Click button “Pattern” to enter pattern operating area. See Figure 3-30.
Figure 3-30 Pattern Operating Area
(1) Add pattern
Click button in pattern operating area and a box will prompt as shown in Figure
3-31. Input the name and click “OK” to add a pattern.
Note: Each pattern should have a unique serial number.
Figure 3-31 Add a Pattern
(2) Modify patter name
Click on the button and a prompt box for modifying patterns will pop up as
shown in Figure 3-32. Click “OK” to save changes after modification.
To Next Page
Loading...
