Note: Patterns must have unique names.
Figure 3-32 Modify Patter Name
(3) Remove pattern
Select the pattern you want to delete in pattern list and click on the button,
then a confirm box will prompt as shown in Figure 3-33. Click “OK” to delete the pattern.
Figure 3-33 Confirm box
(4) Record pattern
Select the pattern you want to record in and click button to start record. The
button will appear and the status bar will show “Recording” in recording duration
as shown in Figure 3-34. Click the button again to exit pattern recording.
Figure 3-34 Record pattern
(5) Recall pattern
Select the pattern you have recorded and click button to call it. The button will
appear and the status bar will show “Calling” in calling duration. Click the button
To Next Page
Loading...
