172.10.77.22, alarm out port: 5) is triggered. Uncheck the box to deactivate corresponding
alarms.
Figure 3-38 Two Alarm Equipments Triggered
3.9 Alarm Information Bar
When the system receives an alarm message, alarm information bar will show red font
blinking with an alarm bell. See Figure 3-39.
Figure 3-39 Alarm information bar
Click alarm information bar to unfold it as shown in Figure 3-40. The list enumerates
alarm mode, occurrence time, alarm source and recording camera. You can reorder these
items by clicking corresponding head column. Click to keep the information bar always
visible. Click it again to hide the alarm information bar.
Figure 3-40 Unfolded Alarm Information Bar
Double click on alarm information listed to playback video associated with alarm in single
playback window mode. This requires available pre-allocated space on disk.
To Next Page
Loading...
