In PTZ control area, it supports some advanced operations such as setting presets,
patrolling and patterns.
3.6.1 Preset
Users could point PTZ to a specific location then save it in preset and rename it.
Click “Preset” to enter presets configuration area. In this example it has added 4 presets
as shown in Figure 3-21.
Figure 3-21 Preset Operating Area
(1) Add presets
Click button , a prompt box for adding presets will pop up as shown in Figure
3-22, select number in the drop-down box and input preset name, click “OK” to add
preset.
Note: Each preset should have a unique serial number.
To Next Page
Loading...
