Figure 6-21 Encoding Parameters Configuration
Users can select [Customized] or [Template] mode for record schedule setup:
[Customized]
Users can set pre-record time and post-record time under [Customized] mode. Click
[Motion] or [Schedule] to select the record mode for each time period, and then drag the
mouse and draw time schedule on the time bar, and it supports up to 8 record periods per
day. Select a certain record period and click [Delete] to delete this record period, or click
[Delete All] directly to delete all the record period settings for this camera. Click on any
of the weekly date to select 24-hour of this day, and click [Copy Schedule to] to copy the
record period settings to other days.
[Template]
Under [Template] mode, users can select record schedule templates which are
already edited, or click [Edit Template] to enter Record Schedule setting dialog box.
[Copy Schedule to]
Copy the record schedule settings to other cameras.
6.5.2 Modify Recording Schedule
Select a record schedule and click [Modify] or double click on it to enter Record Schedule
setting dialog box (Figure 6-22) and modify the record schedule.
To Next Page
Loading...
