(2) Delete Map
Click the [Del current map] button in edit state to pop-up the dialog.
(Figure 5-5) Click [OK] to delete current map or click [Cancel] to cancel the operation.
Figure 5-5 Tips: Delete map
(3) Modify Map
Click the [Property] button to pop-up the dialog. (Figure 5-6). Change the
name of the map in the [Name] bar. Click to re-select a map; Click [OK] button
to add the map or click [Cancel] to cancel the modify operation.
Note: [Add sub-map] operation is the same as the [Add new map] operation. The
difference is that the sub-map must be added on the map which has already been
added. (Figure 5-6)
Figure 5-6 Sub map
5.1.2 Hot Spot Operations
Hot spot: A region on the map associated with the channel.
(1)Add hot spot
Click the [Add hot spot] button in edit state to pop-up dialog. (Figure
5-7) Input the name of hop spot in the [Name] bar. Select associated channel in
[Associate] camera list. Click [OK] to add the hot spot.
To Next Page
Loading...
