6.3.3 Remove Cameras
Select one or multiple IP Cameras on the IP Camera list, and click [Delete] button and
click [OK] in the prompt message box (Figure 6-14) to delete the selected IP camera(s).
Figure 6-14 Delete IP Cameras
Note: Analog cameras cannot be deleted.
6.3.4 Reboot Cameras
Select one or multiple IP Cameras on the IP Camera list, and click [Reboot] to reboot the
selected IP camera(s). iVMS-2000 will automatically re-connect all the selected IP Cameras
after rebooting.
Note: Analog cameras cannot be rebooted.
6.3.5 Enable/Disable Cameras
Select an analog camera on the IP Camera list, and click [Disable] to disable this camera,
users can click [Enable] again to enable this camera afterward.
Note: IP cameras cannot be enabled or disabled.
To Next Page
Loading...
