button “OK” to save changes.
Note: You can’t assign the patrol a used name.
Figure 3-27 Patrol Configuration Dialog
(3) Remove patrol sequence
Select the patrol you want to delete in patrol list and click the button. A
confirm dialog will prompt as shown in Figure 3-28. Click “OK” to delete the patrol.
Figure 3-28 Confirm Box
(4) Recall patrol sequence
Select the patrol in patrol list and press the button to recall it. The button
appears while the patrol is active and the status bar displays “calling”. Click the
button again to stop the patrol.
(5) Right-click menu
Click right mouse button in patrol list area and the patrol operating right-click menu
To Next Page
Loading...
