Figure 3-8 Tool Menu
[Backup]
Backup recorded video, see 4.3 Backup for more details.
[Disk Management]
Add/Pre-allocate/Delete record disk.
The available partitions will be listed as Unused Disk (Figure 3-9) and the
pre-allocated disk partitions will be listed as Used Disk. Select the partitions for recording
and click “Add” button to pre-allocate disk space on this partition. Select one used disk
and click “Delete” to remove it.
Figure 3-9 Disk Management
Note:
The iVMS-2000 can’t start record until user has allocated and formatted the
disk.
Modification for disk partitions will take effect after restart the software.
To use a partition it must have more than 2GB free space.
It is recommended to use partitions in NTFS format for higher allocating speed
To Next Page
Loading...
