Note: After clicking the button, the button will change to ,
click again can cancel the current backup operation. If backup is cancelled a
confirmation window will be displayed. (Figure 4-16)
Figure 4-16 Cancel backup tips
CD/DVD Writer:
1. Select [CD/DVD Writer] radio button;
2. Select drive in the combo box and set the disk name (default is current date). (Figure
4-17)
Figure 4-17 Select drive and set the disk name
Note: If the CD/DVD Writer device is not connected, the [CD/DVD Writer] radio
button can’t be used. (Figure 4-18)
Figure 4-18 Tips: Can’t detect device.
3. Click to start burning. A progress indicator will be shown below the
backup interface. (Figure 4-19)
Figure 4-19 Burning
Note: It is different from the local backup that there will be several stages first:
Preparing the Data, Initializing CD/DVD drive, Building the image. If during any of
To Next Page
Loading...
