HIKVISION iVMS-2000 - Page 86

iVMS-2000 User Manual
© 2006-2010 by HIKVISION. All rights reserved.
81
Network settings is for configuration of network parameters.
Parameters
Description
Network ID
Network ID to identify the software in the network, the
default network ID is iVMS-2000(local host name)
Network
[Network] is enabled by default to allow client software and
IE client connection. If [Network] is disabled, then the client
software or IE client cannot connect to this iVMS-2000 server.
Client Port
The iVMS-2000 server port for client connection, which can
be set between 2000~65534 (default port: 8000)
Maximum
Connections
Maximum camera connection number via network, which can
be set between 5~128 connections (default maximum
connection: 128)
Alarm Server IP
Alarm info will be upload to this alarm server IP
Port
Port number for the alarm server
Synchronize at
Synchronize the time of all the IP cameras according to
iVMS-2000 server. This option is disabled by default, and
users can set the synchronize time at certain hour of a day.
Now
Click [Now] button to synchronize all the IP cameras at once
Enable DDNS
Enable/Disable DDNS
DDNS Protocol
DDNS protocol: DYN DNS / PeanutHull
Domain Name
Domain name registered on DDNS server
Server IP
DDNS server address
Port
DDNS server port
User Name
User name for the DDNS domain name
Password
Password for the DDNS domain name
Note: Users need to click [Save] button after parameter modification to save the
Network configuration, and the modification of some parameters would require
iVMS-2000 software reboot before taking effect.