Figure 6-5 Auto Detect and Add IP Cameras
Notes: All the Hikvision IP cameras are with same IP address by default, and
needs to be configured in [Config Parameter] (Figure 6-6).
Users can select an on-line camera, input its login user name and password, and
then click [Config Parameter] to modify the camera parameter as Figure 6-6.
Figure 6-6 Config Parameter
[Add Single IP]
Select “Add Single IP” as Figure 6-7, and input the IP address, port number, user
name and password. Click [Get Camera Info] to get on-line/off-line status of this IP
To Next Page
Loading...
