and for custom image quality settings.
Figure 6-11 Custom Image Quality
[Network Connection Info]
The camera IP, port number, login user name and password, camera number is listed
here. Users can modify [Port] and [Password].
[Enable PTZ]
This option should be enabled if PTZ operations are required for the camera. Click
[Setup] and configure PTZ parameters as Figure 6-12.
Figure 6-12 PTZ Parameters
[PTZ Reverse]
The PTZ operation will be reverse if this option is enabled, i.e. PTZ will pan left if it
receives a “pan right” option.
Note: PTZ COM port configuration is under [Peripheral] configuration menu.
[Private Protect]
The live preview and record video image inside privacy protect area will be blocked
as Figure 6-13.
To Next Page
Loading...
