HIKVISION Network Audio/Video Encoder User Manual

User Manual of DS-6700 Series Audio/Video Encoder
31
The preset can also be used to link to the alarm input when there is alarm event occurring.
Figure 6.7 PTZ Linking
Please refer to Chapter 8.4 Configuring and Handling Alarms for the PTZ Linking settings (Remote
Configuration>Alarm Settings>Alarm Input>Linkage Method).
6.4 Configuring Video Parameters
Purpose:
You can configure the video parameters, including the brightness, contrast, saturation and hue.
Steps:
1. In the live view interface, click the button on the bottom right corner to spread the Video
Parameters Setting interface:
Figure 6.8 Video Parameters Settings
2. Select the mode according to different light conditions. Four modes are selectable:
 Standard: in general lighting conditions (default).
 Indoor: the image is relatively smoother.
 Outdoor: the image is relatively clearer and sharper. The degree of contrast and saturation is high.
 Dim Light: the image is smoother than the other three modes.
3. Move the slider to set the brightness, contrast, saturation and hue to 0~255. The default value is 128 for the
brightness, contrast and hue is 128 and 136 for the saturation.

HIKVISION Network Audio/Video Encoder Specifications

General

Brand	HIKVISION
Model	Network Audio/Video Encoder
Category	Media Converter
Language	English