HIKVISION Network Audio/Video Encoder User Manual

User Manual of DS-6700 Series Audio/Video Encoder
35
Note: If the device is connected to a public network, you should use a NTP server that has a time synchronization
function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is set up in a
more customized network, NTP software can be used to establish a NTP server used for time synchronization.
 Configuring Time Synchronization by Manually
Enable the Manual Time Sync function and then click the icon to set the system time from the pop-up
calendar. You can click the icon to quickly select the time.
Figure 7.5 Time Sync by Manually
You can also check the checkbox of Sync. with computer time to synchronize the time with the local PC.
4. Click the Save button to save the settings.
7.3 Network Settings
7.3.1 Configuring TCP/IP Settings
Network settings must be properly configured before you operate device over network.
Steps:
1. Click Remote Configuration > Network Settings > TCP/IP to enter the TCP/IP Settings interface:
Figure 7.6 TCP/IP Settings

HIKVISION Network Audio/Video Encoder Specifications

General

Brand	HIKVISION
Model	Network Audio/Video Encoder
Category	Media Converter
Language	English