User Manual of DS-6700 Series Audio/Video Encoder
68
Chapter 9 Record/Capture Settings
Before you start
Make sure the Encoder is connected with HDD (for DS-6700HWI/HFI-SATA) or network disk, and the HDD or
network disk has been initialized for the first time to use.
Two record/capture types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled record/capture.
9.1 Configuring Holiday Settings
Purpose:
You may want to have different plan for recording on holiday. Follow the steps to configure the record schedule
on holiday.
Steps:
1. Click Remote Configuration> Camera Settings> Holiday Settings to enter holiday settings interface.
Figure 9.1 Holiday Settings
2. Select an item from the list and click to edit the holiday.
(1) Edit the holiday name.
(2) Check the checkbox to enable holiday.
(3) Select the holiday type from the dropdown list to by month, by week or by date.
(4) Set the start and end date.
(5) Click OK to save the settings and back to the Holiday Settings interface.
To Next Page
Need help?
General
