User Manual of DS-6700 Series Audio/Video Encoder
44
Figure 7.21 SNMP Settings (2)
5. (1) When the security level is set to “auth, priv”, you can configure the Authentication Algorithm and
Private-key Algorithm parameters.
(2) When the security level is set to “no auth, no priv”, you cannot configure the Authentication Algorithm
and Private-key Algorithm parameters.
6. Set the SNMP port (default: 161).
7. Click Save to save the above settings.
7.3.8 Configuring QoS Settings
Purpose:
QoS (Quality of Service) can help solve the network delay and network congestion by configuring the priority of
data sending. The use of a QoS-aware network can prioritize traffic and thus allow critical flows to be served
before flows with lesser priority.
The encoder can mark the data packets for video/audio, event/alarm and management network traffics with
different DSCP values which identify different priority levels of data sending.
Steps:
1. Click Remote Configuration > Network Settings > QoS to enter the QoS settings interface:
To Next Page
Loading...
