User Manual of DS-6700 Series Audio/Video Encoder
40
Figure 7.15 Email Settings (1)
3. Configure the following Email settings:
Authentication (optional): If your mail server requires authentication, check this checkbox to use
authentication to log in to this server and enter the login User Name and Password.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL: Click the checkbox to enable SSL if required by the SMTP server. When the SSL is
enabled, the default TCP/IP port used for SMTP is 465.
Interval: The interval refers to the time between two actions of sending attached pictures.
Attached Image: Check the checkbox of Attached Image if you want to send email with attached
alarm images.
Sender: The name of sender.
Sender’s Address: The Email address of sender.
Choose Receiver: Select the receiver to which the Email is sent. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver’s Address: The Email address of user to be notified.
To Next Page
Loading...
