User Manual of DS-6700 Series Audio/Video Encoder
62
Figure 8.19 Alarm Input Settings-Arming Time
3. Set the arming schedule for the alarm input. Refer to Step 2 Set the Arming Schedule for Motion Detection
in Section 8.4.1 Configuring Motion Detection.
4. Click the Linkage Method tab to set the actions taken for the alarm input. Refer to Step 3 Set the Alarm
Actions Taken for Motion Detection in Section 8.4.1 Configuring Motion Detection.
Figure 8.20 Alarm Input Settings-Linking Method
5. You can also choose the PTZ linking for the alarm input if your camera is installed with a pan/tilt unit.
To Next Page
Loading...
