To Next Page

To Previous Page

Fingerprint Access Control Terminal·User Manual

Chapter 1 Overview

1.1 Introduction

DS-K1T803 Series and DS-K1T804 Series Fingerprint Access Control

Terminal is designed with a 2.4-inch LCD display screen. Offline

operation, wired network (TCP/IP) and wireless network

transmission modes are supported as well. (The models with -1 do

not support the wireless network function.)

Note: The figure on the left is for reference only. Refer to the

actual product as the standard.

1.2 Main Features

1.2.1 DS-K1T803F/MF/EF/MF(L) and DS-K1T804F/MF/EF Features

 Doorbell ringtone settings function

 2.4-inch LCD display screen

 Transmission modes of wired network (TCP/IP) and wireless network

 Max. 3,000 users, 3,000 fingerprints and 100,000 access control events storage

 Export the report and upgrade the device via the USB disk.

 Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint)

and 1:1 mode (card + fingerprint) (DS-K1T803F and DS-K1T804F does not support swiping

card.)

 Multiple authentication modes: card, fingerprint, card + fingerprint, card + password,

fingerprint + password, card + fingerprint + password, terminal authentication, user

authentication and so on. (DS-K1T803F and DS-K1T804F does not support swiping card.)

 EM card reading (DS-K1T803EF/DS-K1T804EF)

 Mifare card reading, including card No. reading (DS-K1T803MF/DS-K1T804MF)

 CPU card reading, including CPU card serial No

 Secure door control unit accessing via RS-485 connection

HIKVISION UD06644B User Manual

Other manuals for HIKVISION UD06644B