To Next Page

To Previous Page

Fingerprint Access Control Terminal·User Manual

5.4.7 M1 Card Encryption

The M1 Card Encryption function increases the authentication security level, which should be

applied together with the card enrollment station of our company via the client software or the

web client. After issuing the card, you can set the M1 card encryption function on the controller.

Note: Only DS-K1T803MF and DS-K1T804MF support the M1 Card Encryption function.

Steps:

1. Select the device in the device list, and click Modify to pop up the modifying device

information window.

2. Click M1 Card Encryption tab to enter the M1 Card Encryption interface.

3. In the M1 Card Encryption interface, check Enable checkbox to enable the M1 card encryption

function.

4. Set the sector ID.

5. Click Save to save the settings.

Note: The sector ID ranges from 1 to 40.

5.4.8 Remote Configuration

Purpose:

In the device list, select the device and click Remote Configuration button to enter the remote

configuration interface. You can set the detailed parameters of the selected device.

Checking Device Information

Steps:

1. In the device list, you can click Remote Configuration to enter the remote configuration

interface.

2. Click System -> Device Information to check the device basic information and the device

version information.

HIKVISION UD06644B User Manual

Other manuals for HIKVISION UD06644B