HIKVISION UD06644B User Manual

Fingerprint Access Control Terminal·User Manual
119
4. Perform the following steps to import the access control points to the group:
1) Click Import on Group Management interface, and then click the Access Control tab to
open the Import Access Control page.
Notes:
 You can also select Alarm Input tab and import the alarm inputs to group.
 For the Video Access Control Terminal, you can add the cameras as encoding channel
to the group.
2) Select the names of the access control points in the list.
3) Select a group from the group list.
4) Click Import to import the selected access control points to the group.
You can also click Import All to import all the access control points to a selected group.
5. After importing the access control points to the group, you can click , or double-click the
group/access control point name to modify it.
5.12.2 Controlling Door Status
Purpose:
You can control the status for a single access control point (a door), including opening door, closing
door, remaining open, and remaining closed.

HIKVISION UD06644B Specifications

General

Brand	HIKVISION
Model	UD06644B
Category	IP Access Controllers
Language	English