Fingerprint Access Control Terminal·User Manual
48
Note: The attendance will not be recorded during the holiday.
7. Press the ESC key and press the OK key to save the settings and exit the interface.
Editing and Deleting Individual Schedule
Steps:
1. Select an individual shift in the By Individual (Schedule by Individual) interface.
2. Select Edit and press the OK key to enter the Individual Shift Settings interface. Follow Section 0
Scheduling Shift by Individual to edit the shift.
Or select Delete to delete the selected individual shift.
4.6.5 Report Management
Purpose:
You are able to export the attendance report, the attendance report, the abnormal attendance record
and the attendance management schedule.
Steps:
1. Plug in a USB disk.
Note: The device will detect the USB disk memory before exporting the report. If the memory is
not enough, the device will pop up a prompt to remind you.
2. Select Attendance Record/Attendance Report/Abnormal Attendance Record in the Report
interface.
To Next Page
Loading...
Need help?
General
