HIKVISION UD06644B User Manual

Fingerprint Access Control Terminal·User Manual
42
 The following steps will take Custom 1 as an example.
3. Press the OK key to enter the Man-Hour Shift configuration interface.
4. Select Edit to enter the Edit Shift interface.
You can edit the shift name, the shift duration, the latest time on-work and the break time.
Notes:
 The shift No. cannot be edited.
 The break time will not be counted into the working hour.
 If set the Latest Time (On-Work) to 0, the function is disabled by default.
You can also select Reset and press the OK key to reset the settings.
5. Press the ESC key and select Yes to save the settings and exit the interface.
4.6.3 Configuring Holiday
Purpose:
Configure the attendance holiday. The device will not take attendance during the holiday.
Adding Holiday
Steps:

HIKVISION UD06644B Specifications

General

Brand	HIKVISION
Model	UD06644B
Category	IP Access Controllers
Language	English