Fingerprint Access Control Terminal·User Manual
156
the decimal digit is 10. It represents that from bit 0, there are 32 bits represent the card ID. (The
length here is calculated by bit.) And the decimal digit length is 10 bits.
Site Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are
available. For detailed information, see the explanation of the card ID.
OEM Start Bit, Length, and Decimal Digit: If you use the transformation rule, these items are
available. For detailed information, see the explanation of the card ID.
Manufacturer Code Start Bit, Length, and Decimal Digit: If you use the transformation rule, these
items are available. Depending on the table displayed above, the manufacturer code start bit is 32,
length is 8, and decimal digit is 3. It represents that from bit 32, there are 8 bits are manufacturer
code. (The length here is calculated by bit.) And the decimal length is 3.
0101001070823
To Next Page
Loading...
Need help?
General
