Fingerprint Access Control Terminal·User Manual
38
1. Select a target department to edit.
2. Press the OK key to enter the configuration interface.
3. Select Edit and press the OK key.
4. Edit the department name, the shift type and the shift name.
5. Press the ESC key and select Yes to save the settings and exit the interface.
Notes:
The department name supports numbers, uppercase letters, lowercase letters, Chinese
characters and symbols.
The department name supports up to 32 characters.
You can configure the shift in the Configuring Shift. For detailed information, see Section
4.6.1 Configuring Department.
By default, the system contains 32 departments.
For details about using the input method, see Appendix B Input Method Operation.
You can also select Reset to reset the settings.
Searching Department
Purpose:
Search the target department by entering the department name.
To Next Page
Loading...
Need help?
General
