Synclara™ Cough System, Model PSC1 User Manual (196286 REV E) 33
Synclara™ Therapy
6. At each cycle, select the preferred option to adjust its settings:
You can adjust these settings for each cycle:
• Duration of therapy session
• Therapy pressure
• Enable, disable, or adjust Flutter.
• Flutter refers to the fluctuations of therapy pressure, as a
pneumatic form of chest physiotherapy to assist the
patient loosen and remove secretions.
7. Press the setting to change it.
8. Press the keypad control and enter the
required setting, or use the + or –
control to adjust the setting.
NOTE:
The maximum pressure that can be set
depends on the pressure ceiling limit
defined in the Clinical Access settings.
See page 43.
9. Press Save to save the changes.
Or, press Cancel.
10. To enable or disable Flutter pressure,
slide the setting to ON or OFF.
Inhale (Blue)
Exhale (Orange)
PAP (Green)
Draft_E_2019-Apr-29_Cleaned
To Next Page