EasyManua.ls Logo

Hill-Rom Synclara PSC1 - Install the Control Unit on the Cart and Stand Assembly

Hill-Rom Synclara PSC1
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Synclara™ Cough System, Model PSC1 User Manual (196286 REV E) 69
Accessories
Install the Control Unit on the Cart and Stand Assembly
1. Find the preferred position to install the tray.
2. Turn the knob on the pole clamp clockwise to hold the tray in position
on the cart.
3. Put the control unit on the tray. Make sure the screw holes on the
bottom of the control unit are aligned with the screw holes on the
tray.
4. Attach the control unit to the tray with the supplied thumb screws.
Draft_E_2019-Apr-29_Cleaned

Table of Contents