Hill-Rom Synclara PSC1 User Manual

Synclara™ Cough System, Model PSC1 User Manual (196286 REV E) 45
Device Settings
CONNECT A BARCODE READER OR PULSE OXIMETER
NOTES:
• Available only if Clinical Access is enabled. See page 42.
• For Bluetooth® detection, have the barcode reader or pulse oximeter
within one meter (3') of the system.
1. Power on the control unit and the device for pairing.
2. Press Device, and press Controls.
3. Slide the setting for Barcode Detection
to ON.
4. Press Connect.
5. Slide the setting for Bluetooth to ON.
6. Select SpO2 to add a pulse oximeter or
Barcode to add a barcode reader.
• To automatically detect and pair the
Bluetooth® device nearby, press
Scan. A list of devices shows.
• To manually add a device, press
Manual Setup.
a. Use the on-screen keyboard to
enter the MAC address, then
press Enter to confirm the entry.
7. When prompted to pair the new device, press Proceed. Or, press
Cancel.
When the device is paired, a check mark
shows next to the device name in the list
of Available Devices.
Draft_E_2019-Apr-29_Cleaned

Hill-Rom Synclara PSC1 Specifications

General

Manufacturer	Hill-Rom
Model	Synclara PSC1
Weight Capacity	500 lbs (227 kg)
Height Adjustment	Yes
Trendelenburg Position	Yes
Reverse Trendelenburg Position	Yes
Side Tilt	Yes
CPR Function	Yes
Application	Patient care
Display	Integrated display
Parameters	Height, tilt, and position adjustments
Power Source	AC power
Mattress Compatibility	Compatible with various mattresses
Control Panel	Integrated touch panel