HIMA HIMatrix F2 DO 16 01 User Manual

F2 DO 16 01 Table of Contents
HI 800 159 E Rev. 2.00 Page 3 of 40
Table of Contents
1
Introduction 5
1.1 Structure and Use of this Manual 5
1.2 Target Audience 6
1.3 Formatting Conventions 7
1.3.1 Safety Notes 7
1.3.2 Operating Tips 8
2 Safety 9
2.1 Intended Use 9
2.1.1 Environmental Requirements 9
2.1.2 ESD Protective Measures 9
2.2 Residual Risk 10
2.3 Safety Precautions 10
2.4 Emergency Information 10
3 Product Description 11
3.1 Safety Function 11
3.1.1 Safety-Related Digital Outputs 11
3.1.1.1 Reaction in the Event of a Fault 12
3.2 Equipment, Scope of Delivery 13
3.2.1 IP Address and System ID (SRS) 13
3.3 Type Label 14
3.4 Assembly 15
3.4.1 LED Indicators 16
3.4.1.1 Operating Voltage LED 16
3.4.1.2 System LEDs 16
3.4.1.3 Communication LEDs 17
3.4.1.4 I/O LEDs 17
3.4.2 Communication 18
3.4.2.1 Connections for Ethernet Communication 18
3.4.2.2 Network Ports Used for Ethernet Communication 18
3.4.3 Reset Key 19
3.5 Product Data 20
3.5.1 Product Data F2 DO 16 014 21
3.6 Certified HIMatrix F2 DO 16 01 21
4 Start-up 22
4.1 Installation and Mounting 22
4.1.1 Connecting the Digital Outputs 22
4.1.2 Connecting the Operating Voltage 23
4.1.3 Cable plugs 23
4.1.4 Mounting the F2 DO 16 01 in Zone 2 24
4.2 Configuration 25

HIMA HIMatrix F2 DO 16 01 Specifications

General

Brand	HIMA
Model	HIMatrix F2 DO 16 01
Category	Controller
Language	English