ix
―――――――――――――――――――――――――――
Attentions During Use
――――――――――――――――――――――――
WARNING
･ To avoid electric shock, do not allow the
product to get wet, and do not use it when your
hands are wet.
･ To avoid electric shock when measuring live lines,
wear appropriate protective gear, such as insulated
rubber gloves, boots and a safety helmet.
･ During current measurement, to avoid an
electric shock accident, do not connect the test
leads to the product.
･ Do not input voltage exceeding 600 Vrms (1000
V max.).
･ To avoid electric shock when replacing the
batteries, first disconnect the clamp portion
from the object to be measured. Also, before
using the product after replacing the batteries,
replace the cover and screw.
･ When replacing the batteries, be sure to insert
them with the correct polarity. Otherwise, poor
performance or damage from battery leakage
could result.
･ To avoid the possibility of explosion, do not short
circuit, disassemble or incinerate batteries.
･ Handle and dispose of batteries in accordance
with local regulations.
･Do not use the instrument where it may be exposed
to corrosive or combustible gases. The instrument
may be damaged or cause an explosion.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
