x
―――――――――――――――――――――――――――
Attentions During Use
――――――――――――――――――――――――
CAUTION
･ This is a precision instrument: do not clamp any
foreign objects in the end of the clamp core, or
insert anything in the core gap.
･ To avoid damage to the product, protect it from
vibration or shock during transport and handling,
and be especially careful to avoid dropping. Do not
exert excessive pressure on the clamp sensor or
attempt to wedge the sensor into a tight spot for
measurement.
･ Before using the product the first time, verify that it
operates normally to ensure that the no damage
occurred during storage or shipping. If you find any
damage, contact your dealer or HIOKI
representative.
･ To avoid damage to the product, do not exceed the
maximum input current rating, which depends on
the frequency of the current being measured (see
Fig.4 of Chapter 3) Be careful about the evolution
of heat, when the input frequency is high.
･ Do not use the product if the battery is exhausted
(when the
mark lights in the display area). Be
sure to replace the exhausted battery with a new
one.
･ When replacing the battery, make sure that the
metal battery snap fitting is firmly connected. If the
metal fitting is loose, adjust it and recheck the
connection. If it isn't connected securely, the power
may not be turned on, and a power may be turned
off during the use.
･ Adjustments and repairs should be made only by
technically qualified personnel.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
