8.6 Message Reference
141
8
Chapter 8 RS-232C/GP-IB/LAN Interfaces
Execute Statistical Functions
Syntax
Command
:CALCulate:STATistics:STATe <1, 0, ON or OFF>
Query
:CALCulate:STATistics:STATe?
Response <ON or OFF>
Example
Command
:CALC:STAT:STAT ON
Query
:CALC:STAT:STAT?
Response
ON
About the Statistical Calculation function
Data samples can be acquired by the following three methods:
• Press the TRIG key
• Apply an EXT I/O TRIG signal
• Send the
TRG command
The
:CALCulates:STATistics:STATe command does not clear
calculation results.
When the valid data count is zero,
n-1
returns 0.
Clearing calculation results does not disable the Statistical Calculation func-
tion.
The upper limit of Cp and CpK is 99.99. Cp and CpK values greater than
99.99 are returned as 99.99.
The lower limit of Cp and CpK is 0. Cp and CpK values less than 0 are
returned as 0.00.
Clear Statistical Calculation Results
Syntax
Command
:CALCulate:STATistics:CLEAr
To Next Page
Loading...
