1.5 Measurement Flowchart
17
1
Chapter 1 Overview
The basic measurement process flow is as follows:
For details about the functions that can be applied to measurement values such
as comparator, trigger and averaging functions, refer to "Chapter 4 Applied
Measurement" (p.41).
1.5 Measurement Flowchart
Selecting the line frequency (p.24)
Turning the power on (p.22)
Connecting the test leads (p.21)
Connecting the power cord (p.20)
Selecting sampling rate (p.34)
Selecting measurement range (p.31)
Selecting measurement mode (p.30)
Executing zero-adjustment
Short the test leads together (p.35)
Measurement Preparations
Instrument’s Settings
Zero-Adjustment
Read the measured value (p.38)
Connect the test leads to a test object.
Measurement Start
To Next Page
Loading...
