Hioki PW3337-01 - Page 80

3.4 Viewing Harmonic Measured Values
74
Harmonic voltage RMS value (HRM V), harmonic current RMS value (HRM A), harmonic active power (HRM
W)
Parameters shown as harmonic level (LEVEL)
1 Press to display LEVEL.
2 Press , , or to
change the harmonic order.
After pressing or :
01 (1st order: fundamental wave compo-
nent) → 02 (2nd order) → … → 49 (49th
order) → 50 (50th order) → 00 (0th order:
DC component) → 01
After pressing or
01
→ 00 → 50 → 49 → ⋅⋅⋅ → 02 → 01
3 The harmonic level will be dis-
played in areas through
on the display.
(Default display)
Display area b: CH1 harmonic voltage RMS value
Display area c: CH1 harmonic current RMS value
Display area d: Harmonic active power
4 Press to change the channel
being shown.
5 Press through to change
the display parameter.