Device Security > Management Access > CLI
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
123
3.10.2 Login Banner
This tab page allows you to replace the CLI start screen with your own text.
In the default setting, the CLI start screen displays information about the
device, such as the software version and the device settings. With the
function on this tab page, you deactivate this information and replace it with
an individually specified text.
To display your own text in the CLI and in the graphical user interface before
the login, you use the
Device Security > Pre-login Banner
dialog.
Operation
Banner Text
Parameters Meaning
Operation When this function is on, the device displays the text information specified
in the "Banner Text" field to the users that login to the device via the
Command Line Interface (CLI).
When the function is disabled, the CLI start screen displays information
about the device. The text information in the "Banner Text" field is kept.
Possible values:
"Off" (default setting)
"On"
Parameters Meaning
Banner Text Specifies the character string that the device displays in the Command
Line Interface at the start of every command line.
Possible values:
alphanumeric ASCII character string with 0..1024 characters
(
0x20..0x7E
) including space character
Tab
\t
Line break
\n
Remaining
Characters
Displays how many characters are still remaining in the "Banner Text" field
for the text information.
Possible values:
1024..0
To Next Page
Loading...