Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
275
8 Routing
This menu allows you to specify the Routing functions settings for
transmitting data on layer 3 of the ISO/OSI layer model.
For security reasons, the following functions are permanently disabled in the
device:
Source Routing
With source routing, the data packet contains the routing information and
overwrites the settings in the router with it.
ICMP Redirects
ICMP redirect data packets are able to modify the routing table. The
device generally ignores received ICMP redirect data packets. The
settings in the
Routing > Interfaces > Configuration
dialog, field
"ICMP Redirects", influence only the sending of ICMP redirect data
packets.
In accordance with RFC 2644, the device does not exchange any broadcast
data packets from external networks in a local network. This behavior
supports you in protecting the devices in the local network against
overloading, for example due to so-called smurf attacks.
The menu contains the following dialogs:
Routing Global
Interfaces
ARP
Open Shortest Path First
Routing Table
Tracking
Loopback Interface
L3-Redundancy
NAT
To Next Page
Loading...