Hirschmann HiSecOS EAGLE20 - Masquerading NAT Overview

Routing > NAT > Masquerading NAT > Overview
Routing
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
405
Routing > NAT > Masquerading NAT > Overview
8.39 Masquerading NAT Overview
In this dialog you will find an overview of which NAT rule is assigned to which
router interface.
You create and edit the NAT rules in the
Routing > NAT > Masquerading
NAT > Rule
.
You assign a router interface to the affected NAT rule in the
Routing > NAT >
Masquerading NAT > Mapping dialog.
 Table
Parameters Meaning
Port Displays the number of the router interface on which the device applies the
NAT rule.
Rule Index Displays the sequential number of the NAT rule, see the "Index" in the
Routing > NAT > Masquerading NAT > Rule dialog.
Rule Name Displays the name of the NAT rule, see the "Rule Name" field in the
Routing > NAT > Masquerading NAT > Rule
dialog.
Trap Displays whether the device sends an SNTP trap when it applies the NAT
rule to a data packet.
Possible values:
 marked
The device sends a SNMP trap.
 unmarked
The device does not send a SNMP trap.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps) dialog and
specify at least 1 SNMP manager.
Log Displays whether the device places an entry in the log file (system log)
when it applies the NAT rule to data packets.
Possible values:
 marked
The device places an entry in the log file (system log) when it applies
the NAT rule to a data packet.
 unmarked
Logging is disabled.