Network Security > Packet Filter > FLM
Network Security
140
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Packetfilter Rules
Parameters Meaning
Rule Index Displays the sequential number of the rule. The device automatically
assigns this number.
Description Specifies a name or description for the rule.
Possible values:
alphanumerical ASCII string with 0..64 characters
Source Address Specifies the source address of the data packets to which the device
applies the rule.
Possible values:
any
(default setting)
The device applies the rule to data packets with any source address.
Valid IPv4 address
The device applies the rule to data packets with the specified source
address.
Valid IPv4 address and netmask in CIDR notation
The device applies the rule to data packets with the specified source
address in the specified subnet.
An exclamation mark (
!
) preceding the IP address reverses the
expression into its opposite. The device applies the rule to data
packets which do not contain the source address specified here.
Destination
Address
Specifies the destination address of the data packets to which the device
applies the rule.
Possible values:
any
(default setting)
The device applies the rule to data packets with any destination
address.
Valid IPv4 address
The device applies the rule to data packets with the specified
destination address.
Valid IPv4 address and netmask in CIDR notation
The device applies the rule to data packets with the specified
destination address in the specified subnet.
An exclamation mark (
!
) preceding the IP address reverses the
expression into its opposite. The device applies the rule to data
packets which do not contain the destination address specified here.
To Next Page
Loading...