Hirschmann HiSecOS EAGLE20 - Page 170

Network Security > DPI > OPC Enforcer
Network Security
170
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Table
Parameters Meaning
Index Displays the number of the rule to which the table entry relates.
To specify a new DPI OPC Enforcer rule in the index, click the
Create
button.
Description Specifies the name for the entry.
Possible values:
 opc (default setting)
Standard name for the DPI OPC Enforcer entry.
 <description>
User-specific name for the DPI OPC Enforcer entry. Alphanumeric
ASCII character string with 0..64 characters.
The device differentiates between upper and lower case. Enter a
name that describes the DPI OPC Enforcer rule.
Sanity Check Activates/deactivates the plausibility verification for data packets.
Possible values:
 marked (default setting)
The plausibility check is activated.
The device verifies the plausibility of the data packets as regards
format and specification.
 unmarked
The plausibility verification is deactivated.
Fragment Check Activates/deactivates the fragment verification for data packets.
Possible values:
 marked (default setting)
The fragment verification is activated.
The device verifies the data packets for fragment characteristics.
 unmarked
The fragment verification is deactivated.
Timeout at Connect Specifies the period in seconds after which the device terminates the OPC
data connection.
Possible values:
 1..60 (default setting: 5 )
 0
The value 0 deactivates the function. The OPC data connection
remains set up without a time limit.
Profile Active Activates/deactivates the rules.
Possible values:
 marked (default setting)
The rule is active.
The device applies the rule to the data packets.
 unmarked
The rule is inactive.