Virtual Private Network > Overview
Virtual Private Network
208
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
IPsec-Tunnel
Input [Byte]
Displays the number of bytes received from this VPN tunnel.
IPsec-Tunnel
Input [Packet]
Displays the number of packets received from this VPN tunnel.
Last IPsec-data
received [s]
Displays the time, in seconds, since the VPN tunnel has received last time
data.
IPsec-Tunnel
Output [Byte]
Displays the number of bytes sent into this VPN tunnel.
IPsec-Tunnel
Output [Packet]
Displays the number of packets sent into this VPN tunnel.
Last IPsec-data
transmitted [s]
Displays the time, in seconds, since the VPN tunnel has sent the last time
data.
IKE Initiator SPI Displays the Security Parameter Index (SPI) of the IKE initiator, depending
which device you specify as the initiator. For example, when you specify this
device as the initiator, then this value is the SPI of the local device.
IKE Responder
SPI
Displays the SPI of the IKE responder, depending which device you specify
as the initiator. For example, when you specify this device as the initiator,
then this value is the SPI of the remote device.
IPSec Input SPI Displays IPSec Security Parameter Index (SPI) that the device applies to
the data it receives from the VPN tunnel. The SPI allows the device to select
the SA under which it processes a received packet.
IPSec Output SPI Displays IPSec Security Parameter Index (SPI) that the device applies to
the data it transmits to the VPN tunnel.
Button Meaning
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...