Virtual Private Network > Virtual Private Network Certificates
Virtual Private Network
212
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Private Key File Displays the name of the private key file.
The device allows you to enter alphanumeric characters plus hyphens,
underscores and dots.
Possible values:
alphanumeric ASCII character string with 0..64 characters.
Active
Connections
Displays the number of active connections that are using this certificate.
The device only allows you to delete the certificate when the value is 0.
Possible values:
0..256
.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Delete Removes highlighted table entries.
Upload Opens the "Upload" dialog to add another certificate to the table.
The "File" field displays the certificate to upload on the device. You
select the certificate using the "Browse..." button.
In the "Passphrase" field, you specify the passphrase used with this
certificate.
Possible values:
Alphanumeric ASCII character string with 0..128 characters
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...