Virtual Private Network > Connections
Virtual Private Network
214
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Traffic Selector
Active
Activates/deactivates this table entry.
Possible values:
marked
The device filters the data stream according to the parameters specified
in the traffic selector only when the row status is active.
unmarked
(default setting)
The device allows you to edit the traffic selector parameters only when
the row status is inactive.
Source Address
(CIDR)
Specifies the IP address of the source host with the netmask entered in
CIDR notation. When the device forwards packets containing this source IP
address over a VPN tunnel, it applies the settings specified in this row.
Furthermore, the device applies the associated IPsec and IKE-SA settings,
to every IP packet it forwards containing this address.
The keyword
any
means that the device applies the settings in this row to
every packet it forwards.
Possible values:
valid IP address with netmask in CIDR notation (a.b.c.d/n) (default
setting:
any
)
Source
Restrictions
Specifies the optional source restrictions using names or numbers entered
as <protocol/port>. The device sends only the type of data specified through
the VPN tunnel. For example, tcp/http which is equal to 6/80, udp which is
equal to udp/any, or /53 which is equal to any/53.
Possible values:
alphanumeric ASCII character string with 0..32 characters (default
setting: blank)
When the field is blank, the device uses any/any as the source
restriction.
Destination
Address (CIDR)
Specifies the IP address of the destination with the netmask entered in
CIDR notation. When the device forwards packets containing this
destination IP address over a VPN tunnel, it applies the settings specified in
this row. Furthermore, for every IP packet the device forwards containing
this address, it applies the associated IPsec and IKE-SA settings.
The keyword
any
means that the device applies the settings in this row to
every packet it forwards.
Possible values:
valid IP address with netmask in CIDR notation (a.b.c.d/n) (default
setting:
any
)
Destination
Restrictions
Specifies the optional destination restrictions using names or numbers
entered as <protocol/port>. The device accepts only the type of data
specified from the VPN tunnel. For example, tcp/http which is equal to 6/80,
udp which is equal to udp/any, or /53 which is equal to any/53.
Possible values:
alphanumeric ASCII character string with 0..32 characters (default
setting: blank)
When the field is blank, the device uses any/any as the destination
restriction.
Parameters Meaning
To Next Page
Loading...