Virtual Private Network > Connections
Virtual Private Network
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
217
IKE Auth. Cert.
Remote
Specifies the file name of the certificate the remote device uses. The device
uses this certificate authentication of the remote peer on the local side. This
certificate binds the identity of remote peer to the specified public key.
The value is optional, because the remote peer typically sends the
certificate and the device only checks the validity of the certificate.
The prerequisite for using this parameter is that you set the "Authentication
Type" to
individualx509
.
Possible values:
alphanumeric ASCII character string with 0..128 characters.
Encrypted Private
Key
Specifies the private key file name. This value is only the file name of the
private key. Enter the passphrase in "Encrypted Key / PKCS12
Passphrase".
The prerequisite for using this parameter is that you set the "Authentication
Type" to
individualx509
and you encrypt the key saved on the device with
a passphrase. When you encrypt the key saved on the device, the key and
the certificate remain unmatched.
Possible values:
alphanumeric ASCII character string with 0..128 characters.
Encrypted Key /
PKCS12
Passphrase
Specifies the passphrase to use for the decryption of the private key in
"Encrypted Private Key" or pkcs12 certificate container.
Possible values:
alphanumeric ASCII character string with 0..128 characters.
Parameters Meaning
To Next Page
Loading...