Graphical User Interface
22
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
The "Snapshot …" tab displays the values in the usual way in the dialog
fields. The fields are write-protected, thus modifying the values is
impossible. You right-click the tab to open the context menu.
Designation Meaning
Snapshot
Create The device generates a snapshot of the current settings. This
will take 20 s or longer, depending on the device settings.
In the tab area at the upper edge, the device adds the
"Snapshot …" tab.
While the device is generating the snapshot, the tab
displays the symbol . The menu section and the dialog
section are concealed meanwhile. To continue to work,
change back to the "Online" tab.
If the snapshot is entirely generated, the symbol on the tab
disappears. The menu section and the dialog section are
visible.
Load... The device loads a previously generated snapshot from a file.
This will take 10 s or longer, depending on the device settings.
In the tab area at the upper edge, the device adds the
"Snapshot …" tab.
While the device is loading the snapshot, the tab displays
the symbol . The menu section and the dialog section
are concealed meanwhile. To continue to work, change
back to the "Online" tab.
If the snapshot is entirely loaded, the symbol on the tab
disappears. The menu section and the dialog section are
visible.
Table 1: "Online" tab: functions in the context menu
Designation Meaning
Save as... Exports the snapshot and saves the settings and operating
parameters as a file on your PC.
Close Closes the "Snapshot …" tab. Unsaved information are lost.
Table 2: "Snapshot …" tab: functions in the context menu
To Next Page
Loading...