Hirschmann HiSecOS EAGLE20 - Page 221

Virtual Private Network > Connections
Virtual Private Network
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
221
IKE Encryption Specifies the encryption algorithm that the device uses for IKE.
Possible values:
 any
The device accepts every algorithm when you specify it to be a
responder, and uses various pre-defined algorithms as the initiator.
 des
The device uses the Data Encryption Standard (DES) block cipher for
encryption of message data with a 56-bit key.
 des3
The device uses the Triple DES block cipher for encryption of message
data which applies the 56-bit key, from DES, 3 times to each block.
 aes128 (default setting)
The device uses the Advanced Encryption Standard (AES) with a block
size of 128 bits, and a key length of 128 key bits.
 aes192
The device uses the Advanced Encryption Standard (AES) with a block
size of 128 bits, and a key length of 192 key bits.
 aes256
The device uses the Advanced Encryption Standard (AES) with a block
size of 128 bits, and a key length of 256 key bits.
Local Endpoint Specifies the hostname or IP address of the local security gateway.
Possible values:
 any (default setting)
The device uses the IP address of the interface the device uses to
forward data to the remote endpoint.
 valid IPv4 Address and netmask
 hostname
alphanumeric ASCII character string with 0..128 characters. When you
specify a hostname, then the device delays the VPN tunnel until it
receives an IP address for the hostname.
Remote Endpoint Specifies the hostname or IP address of the remote security gateway.
Possible values:
 any (default setting)
The device accepts any IP address when establishing an IKE-SA as a
VPN responder.
 valid IPv4 Address and netmask
If you specify that the device is a responder for this VPN tunnel, then the
device accepts a network in CIDR notation, during IKE-SA
establishment.
 hostname
alphanumeric ASCII character string with 0..128 characters. When you
specify a hostname, then the device delays the VPN tunnel until it
receives an IP address for the hostname.
Parameters Meaning